If you are planning on installing a metal roof by yourself, then you’ll want to pay attention to the list of five tips below. Even though it’s not as complex as some people think, it’s a project that will require you to know a thing or two while you’re installing it. Of course, as long as you follow the instructions outlined by the manufacturer you should be in good shape.
It’s important to make sure that your metal roof is installed properly so you get the full benefits. Those benefits include but are not limited to all-weather resistance, energy efficiency, and durability. A metal roof can even last much longer compared to shingles that are made from asphalt.
With that in mind, let’s dive right into the tips below so you have a good idea of what to do during the install process:
Table of Contents
1. Safety First
Of course, we always have to take safety into consideration. While installing a metal roof, you’ll need a pair of safety goggles and gloves. Since you’ll be up above the ground, you’d be smart to wear a hard hat in case you slip and fall. Also, protection from cuts is a must so wear long-sleeve clothing if the weather conditions permit it.
2. Pre-Drill The Panels
If you want the installation to go smoothly, then you’ll want to pre-drill the panels. This will make straight screw lines easier to do. And you can fasten the panels much faster. This is especially important on standing seam metal roof.
While it’s not a shortcut, it’s working smart when it comes to installing your new roof. Plus, it’s the fastest way to go about doing it without sacrificing quality.
3. Start With Square
To define this tip, the vertical lines of your metal roofing material should be vertical with the eave. This will set the stage for the rest of the panels. If you keep it perfectly aligned, so will the rest of the roof. Keep this in mind when you begin the initial install.
4. Be Precise With Your Screws
Precision is key when fastening your screws. You don’t want to overtighten them in the slightest as it may lead to potential damage or warping. Before the install, practice tightening your screws by using pieces of scrap metal.
5. Always Clean Up
Of course, once the install is complete it would be a smart idea to clean up your work station. This includes properly disposing of scrap metal and other waste. Also, this should be a good time to check for any uneven areas that your roof may have. Make some cuts if necessary and dispose of the extras.
Final Thoughts
These give metal roof installation tips that might be something you’ll need to take to heart whenever you need to install one in your home. Doing it yourself might be easier done than said as long as you follow the instructions properly.
Remember, you always have the option to have a professional install it for you as well. But if you are looking to save money, doing it yourself is the way to go. This article is brought to you by one of the best Atlanta roofing companies, Colony Roofers.